Back at the turn of the millennium, there was a hyper-rare Space Marine that was only available in England if you spent £500 in a Games Workshop during the Skulz programme. On a pocket money budget, it took the co-ordinated efforts of all my friends to get one. And over two decades later, here he is painted.

He’s a stellar miniature that was really ahead of his time for a number of reasons. First, he came with a solid metal base (40mm no less, when nothing larger than 25mm for infantry had ever been seen) depicting a fallen Chaos standard – at a time when scenic bases were incredibly rare. Second, he clutches a standard of Ultramar – a sculpted banner at a time when banners were paper affairs you photocopied from White Dwarf or came supplied as self-adhesive labels. Third, he was sculpted by Shane Hoyle, one of my favourite sculptors – and notable as he’s one of the first Imperial Space Marines since 1990 not sculpted by Jes Goodwin.

I wondered back in 1999 if he was Ancient Helveticus – the Ultramarines special character. But Helveticus’ defining feature is the Banner of Macragge, and this sculpted banner didn’t match the design from White Dwarf 195. Plus his wargear didn’t match the 2nd edition Warhammer 40,000 Ultramarines Codex (or the 3rd edition Chapter Approved incarnation). And critically, as you can just about see in the photo above, his left shoulder has a skull marking inside an Ultramarines’ inverted omega sculpted on – meaning his rank is more likely Sergeant than Chapter Ancient.

On the subject of shoulder marking – his right pad features a sculpted-on Tactical Squad arrow. This is a source of irritation to me, as I’ve copied the white trims of the original ‘Eavy Metal paintjob. If you’re strict about the Codex Astartes – and Ultramarines are strict – the only two Companies identified with white shoulder pad trims are First and Tenth, and neither has any Tactical Squads. I will conceptualise my version not as a Chapter Ancient (or Company Ancient for that matter), but as a Third Company Sergeant with non-standard trim markings denoting Veteran status (and will back this up by pointing to the Crux Terminatus on his left calf as further proof of Veteran-ness), holding a sacred Ultramarines standard (but not a Company or Chapter banner).

HIs release through the tertiary channel of exclusive Skulz retail incentives makes him one of the rarest Ultramarines miniatures, except for perhaps the 2004 Black Library Uriel Ventris diorama. So here he is alongside my other limited editions, marching for Macragge.

Ninjabread out!

Limited edition miniatures are entirely my jam. Limited edition Space Marines doubly so. When Citadel produced this “Imperial Space Marine” to celebrate 30 (ish*) years of power-armoured super soldiers, I giddily hoovered it up.

The miniature is an update of the very first LE02 Imperial Space Marine released in summer 1985. Loads of care was put into copying over the details, from the vacuum-cuffs on the calves, the ribbing on the elbow pads, the rivets on the helmet, and the noodly wiring on the weapon. Here are the two versions side by side.

So there I am, thinking that I’m on the cutting edge of Space Marine miniatures with this lad, and actually it’s been out 5 years and has already had his Codex entry deleted. And the modern range of Space Marines are as big again.

And if you’re interested in learning the hands down best ever recipe and method for painting Ultramarines it’s over on the Ninjabread Patreon.

When the Marine The original LE02 Marine’s weapon was marvellously oddball. It’s classic mid-1980s Bob Naismith sculpting, where wiring and nozzles were de rigueur. This design of bolter was phased out by 1987 in flavour of the blockier designs that endure to this day. However, the 2016 Imperial Space Marine gloriously recreates the original noodle-nozzle weapon, reconceptualising it on the accompanying rules sheet as a “disintergration combi-gun”.

Ninjabread out!

*The Imperial Space Marine was released in Spring 2016, which was 31 years after the original from Summer 1985.

This March I am proud to present an Ultramarines combat squad deliberately contrived to conjure up a very particular point in time – November 1990. It’s March for Macragge.

Tactical Squad Rhenus. Their presence remakes the past.

In November 1990 Space Marine design saw a step change with the release of the RTB15 Strike Force boxed set. The new age of Warhammer 40,000 was ushered in with these brand new metal-plastic hybrid Marines.

It was the transition point from mk6 power armour to mk7 power armour. It was the transition from one-piece metal castings to metal torsos with plastic arms and accessories. It was the transition from Bob Naismith, Aly Morrison and Mark Copplestone designing Space Marines to Jes Goodwin.

There are two versions of each of the Strike Force torsos – the earlier verion had rounded shoulders which made them backwards compatible with the RTB01 plastic arms, and the later version had the shoulders flattened off to fit with the 1991 redesigned arm sprue. The 1990 arm sprue from the Strike Force box was curiously discontinued – if you know why, please enlighten me in the comments.

The 1990s would go on to see the mk7 range fully rounded out with more torso designs, special and heavy weapons, jump packs, and all new accessory sprues. But in November 1990 if you wanted any of that for your mk7 marines you had to use the old mk6 pieces – which is what I’ve done on this squad. The Sergeant’s powerfist and weeny bolt pistol, the rocket launcher, various ammo packs and binox are all pilfered from the RTB01 kit.

The RTB01 rocket launcher (below left) requires a bit of fiddly modelling to get it to work on a Strike Force torso – the arm toting it is a combination of the original RTB01 arm with a Strike Force shoulder pad, and some putty for the wrist armour.

The Ultramarines project means I’m painting three blue Space Marine armies concurrently. I’d be nice to have the three projects more visually distinct, but I’ve got strong emotional reasons for each scheme individually so I will just have to live with a big jumble of blue in the display cabinet. It’s like that Eiffel 65 song. Da Ba Dee. Da Ba Daa.

I’m bursting with ideas for other Ultramarines squads, and while I’m not going to collect the entire Chapter there are 99 other squads to explore with 1990s-themed collecting and modelling ideas.

This squad makes me feel as nostalgically 1990s my other hobby – standing outside derelict Global Video stores.

I’m putting together a full tutorial for Ultramarines power armour which will publish soon. If you head over to the Patreon, there’s already a wealth of tutorials for how to paint Blood Angels, Crimson Fists, Nemesis Chapter, an Apothecary, Deathwatch, gold power armour and battered yellow armour, as well as lots of skin recipes and special freehand walkthroughs.

Coming soon, more blue Space Marines. Ninjabread out!

I ni ce Ninjabread readers. Fogou Models recently sent me advanced castings of their brand new mud hut range, on the condition I sent them back painted photographs for their Kickstarter. And now I have an entire mud hut village to play games over.

I imagined my buildings as a Dogon village at the time of the Arab Conquest, as that’s the period I want to game in. But I kept the paint scheme neutral so that with a tactical choice of accessories I can pass the buildings off as coming from the Pre-Pottery Neolithic B era, the Tunisian campaign in World War 2 and ANY POINT IN THE INTERVENING TEN-THOUSAND YEARS OF HUMAN HISTORY.

If the giddying versatility of mud huts through history is simply not enough for you, the buildings can slip into a similarly vast array of fantasy and sci-fi wargame settings. Oldhammer peers axiom and asslessman both science-fictioned up their advance castings with all sorts of greebles transgressing the historical wargamer’s sensibilities. Rather than stare on enviously, I asked Fogou nicely for another hut that I could spin as a Space Ork adobe.

I had so much fun painting these buildings that even though I’ve blasted through a whole village I’m keen to do more. Maybe fill a whole 6×4′ table and play big games of Warhammer 40,000 Cityfight but in an Ork city rather than the bog standard Imperial one.

The thing that doesn’t come across in these photos is how the kits are designed to be painted super quickly. Assembly is minimal, and they’re moulded in yellow resin that you can drybrush without having to prime or basecoat. You could paint up a whole Dogon village so quickly I begged and begged and begged Fogou to call the project…

Thanks to Fogou for all the buildings! Check out the Kickstarter, which ends this week. K’an bεn!

Buenos dias, Ninjabread readers. Today my Mexican-flavoured vintage Space Marine army gets some Adeptus Mechanicus reinforcements. An “Adeptus Mexicanicus”, if you will.

This Marine is one of the vintage Mark Copplestone designs, wearing a modified suit of Mk 6 power armour – instantly recognisable from its chest cabling and beaked helmet. What makes the Copplestone Techmarines really stand out is the wealth of bonus tech details – the toolbox, the magnifying lenses, the drillbit and equipment mounted on the belt. They’re a joy to paint.

The gnarly witch hand sculpted onto the right shoulder is the original symbol of the Adeptus Mechanicus, before it changed to the skull cog of today.

Back in the olden days, Techmarines were just basic lads with a bolt pistol, who you had to field one for each vehicle or support weapon in your army. Over the years they’ve grown in stature and are now mighty HQ choices striding around the battlefield with an exotic array of wargear and special rules. So that I can field this miniature in modern games of 8th edition Warhammer 40,000 and still have it backwards compatible for Rogue Trader, I modelled his modern wargear as a separate little drone.

The drone’s chassis started life as an upside-down 6mm Epic-scale Land Raider with the smoke launchers and sponsons sliced away. The weapon is the business end of the standard Rogue Trader Imperial Conversion Beamer, mounted on the much meatier body of a Eldar D-Cannon.

To descale it, I added big chunky rivets made from sliced down plastic tubing, and a big fat radio-control antenna with a pennant with the classic Beamer identification symbol.

In games of Warhammer 40,000 he’s been great at zapping enemies, but has yet to unlock his full potential as the army has precisely zero vehicles for him to repair. But I plan to remedy that soon with some solid lead Dreadnoughts, Landspeeders and support weapons!

Ninjabread communication complete!

Space Marine Chapter founders love a good animal name. Mythical beasts of terror (Howling Griffons, Minotaurs, Silver Drakes…), apex predators (Space Wolves, Celestial Lions, White Panthers…), birds of prey (Hawk Lords, Necropolis Hawks, Raven Guard…), venomous reptiles (Iron Snakes, Viper Legion, Salamanders…). But I’ve just painted these Deathwatch, the Chapter named after tiny insects that burrow into your wooden furniture.

They’ve come to destroy the xeno-filth of the galaxy just like the beetles destroy your antique furniture. I suppose they’re not the only Space Marine chapter named after insects – there’s Mantis Warriors. But Mantises are cool insects that do decapitation and look like samurai. Maybe my problem with the Deathwatch name is just me, growing up binging on episodes of Antiques Roadshow and Lovejoy, and Joe Public just thinks it’s kewl as it starts with “Death” and death is kewl.

The Primaris Aggressors’ poses are entirely fixed, so the closest thing you get to choice is slicing the tag off the heads so you slightly twist them, though not too much as they’ll just end up staring at the inside of their armoured hoods. Fixed poses aren’t a bad thing, if they’re dramatic, but all three are “video game character selection screen” poses. It would have been cool to them pointing their guns not at the ground, and have the Sergeant pointing dramatically. But attempting any of that requires a filthy amount of modelling work, re-engineering all the pipes and ammo feeds.

So, with no reposing potential, I stamped these Deathwatch as “mine” with a big freehand banner on the Sergeant. It’s taken from the Ironclad Dreadnought kit – just like my Nemesis Chapter Intercessor Sergeant. The design is a combination of the Deathwatch and Ultramarines chapter icons, bordered with black and white checks. I was super-keen to get Ultramarines icongraphy front and centre since both the Sergeant’s shoulder pads are taken up with sculpted details.

I picked out the Deathwatch skull in red with a white stripe (along with the skulls on the fist, leg and shoulder), echoing the Codex Astartes veteran sergeant helmet markings. He’s named Amorgaudium as it’s High Gothic for Lovejoy – a rascally antiques dealer who understands how terrifying Deathwatch Beetles are.

I’ve photographed and written up a masterclass tutorial with all the steps, paint mixes and theory for the black on these Deathwatch. If you’d like access, it’s over on the Ninjabread Patreon page, along with over a dozen other masterclasses.

The squad’s now ready to join my Nemesis Chapter army as an Auxiliary Support Detachment. What next for the army? Maybe some Troops, maybe some HQ, (Death)watch this space!

It was competition time again over at the Oldhammer Community. The friendly neighbourhood Jeany-Bap-Baps challenged hobbyists to paint miniatures sculpted by the great Bob Olley, and have them judged by the Lord our Bob himself. I couldn’t resist, and so I created this mini-diorama.

Bob Olley was one of the key contibutors to the nascent Warhammer 40,000 range, and he sculpted a huge portion of the Squat range that I’ve loved collecting, painting and gaming with through the years.

The Squat Berserker isn’t actually one of those original Rogue Trader miniatures, but a hyper-limited edition that Bob sculpted for a tiny indie manufacturer that’s since disappeared. I was hoping its extreme rarity would mean everyone who saw my painted casting would HAVE THEIR MINDS BLOWN with the novelty.

Only not. The first bloke I showed mine to simply said, “Yeah whatevs, looks like the one I did.” Screw you, Paul. Screw. You.

Not only that, but turns out his blogpost features loads of other cool indie manufacturers’ Squat miniatures that he also painted before I did mine. Sho3box is exactly the kind of person that turns up to cool parties wearing the same Decepticon logo shirt as you. And with the girl you were hoping to ask out already on his arm.

So I had to push further to ensure novelty, and modelled the Slayer standing over another Olley sculpt – an original Citadel Miniatures Genestealer Patriarch. I sawed that huge lead torso diagonally in half, and chopped apart and resculpted the limbs until I was satisfied the Patriarch was looking sufficiently collapsed, defeated, and bleeding out into the cold metal grille of the base.

It’s also the second Genestealer model I’ve painted recently, the first being a Locus for a wet-blended purple cloth tutorial for Patreon supporters. Check it out here!

Over forty people made it to the finishing line in the Oldhammer Community‘s Olley competition, and we wait with baited breath to see who Bob judges the best. (If it’s sho3box, I’ll explode.)

I normally have a cooling off period before I buy new Games Workshop releases, as every miniature is turbo-exciting on first reveal and owning all of them is impossible. But the new Genestealer Cult Locus is such an instant classic he was not only pre-ordered but jumped to the front of the painting queue.

The sentinel-like pose, with him resting nonchalantly on his weapon in a set of long hooded robes, is one of Citadel Miniatures’ time-honoured sculpting tropes. Chaos Dwarf Khazek Doomlord, Human Wizard Pedregar the Green and one Champion of Tzeentch have also appeared with it. There’s a cheeky little Genestealer tail poking out under the robes’ hem which tells you he’s more than human, and when you get round the back there’s a set of carapace ridges that make you wonder about what generation of Hybrid he is.

The shoulderpads I painted with a little Cult icon and a W so when you look at the miniature from above it spells out “CW” – my initials.

Here he is on an advance casting of the Scrap Fort from Fogou Models, which is my ongoing major terrain project at the moment. I’ll be showing off the complete fort soon, and maybe using it as a rationale for growing the Genestealer Cult (can’t have just one Locus knocking about in such a large fort on his own).

Painting Purple Tutorial

As the Locus is 95% robes, he’s a great miniature for teaching the technique for painting cloth. The purple uses a “wet-blending” method that’s been photographed between stages from all angles and written up clearly and comprehensively, breaking down the theory, technique and colours used.

It’s my seventh instalment in the Patreon tutorial series that’s proved really popular. Big thanks to last month’s new patrons Craig, John, Steve, Ben, Jason, David, Toby, Jamie, Victor, Dimitrios, André, Alan, Brian, Alexander and Philipe.

The Genestealer Cult range is dripping with great models, from homages to the original Rogue Trader range (the Nexos), and new character types (like the Locus and the Kelermorph) which mean my Cult will inevitably grow. Though I might take an oldskool detour with the vintage 1980s Throned Patriarch and some Bob Olley Hybrids. Watch this space!

I love doctors. And I love Space Marines. Put them together, and you get Doctor Space Marines, dispensing healthcare and the Emperor’s justice across the battlefields of the 41st millennium.

Here’s the 2017 Primaris Apothecary alongside his very own primogenitor – the very first Apothecary miniature Games Workshop produced back in 1987. Oh, how far miniature design has come in thirty years.

The Primaris Apothcary is absolutely loaded with so much detail he crosses the line from miniature into micro-diorama. He stands over a fallen Battle Brother, having removed the progenoid glands, and every surface is festooned with details like cannisters, helix motifs, lenses and surgical tools. However, I have become obsessed with one detail – the mysterious skull strapped to his arse.

During the long evenings of painting, I came up with my own backstory about who this skull belonged to…

The Rogue Trader Apothecary came from Rochie of Buried Under Lead. Rochie has converted and painted up this mini already – you should check it out here. Thanks for the gift, Rochie!

Patreon Painting Tutorial

If you’d like to learn how to paint white exactly like this, I took super-detailed stage-by-stage photos on the Ninjabread Patreon, and have written up the method, colours and theory.

On top of this tutorial, patrons get instant access to the whole six month back catalogue with five more masterclasses covering other colours of power armour, cloth and my Golden Demon winning piece.

I’m really keen on collecting more Apothecaries now, and am taken by the idea of one with a Crimson Fists one with a bike or jump pack with “Fist Responder” armour graffiti.

The sheet-metal walls you can see above are a preview casting of a Fogou Models terrain set that’s coming soon! Keep your eyes peeled!

Coming soon: even more Space Marines, old and new!